1) No Power

01) I turn the power on, and nothing happens.  No lights, no 
noise, no control panel, nothing.

There can be a lot in a printer that will cause this problem, 
and we'll go over the most obvious first.

Corrective measures:

Power cord.

Make sure the power cord is plugged in on both ends.  
Pull it out, and push it back in.
Make sure the power cord is in good condition.  Check for 
tears or kinks.  If the wire is severely kinked, or if there 
are any tears in the rubber insulation, throw the power cord 
away.  Place a call at Cincinnati Printer Repair
Check the printer where the power cord plugs in.  With 
the cord plugged in, the connection should feel tight and 
secure.  If you are able to jiggle it around, or if the cord 
comes out easily, Place a call at Cincinnati Printer Repair


Power Outlet

Check the power outlet on the wall.  The plug should fit 
into the outlet, and not jiggle around.  It should feel nice and 
firm.  If not, you need an electrician.
Plug something else into the outlet to make sure that you 
have power there.  If you plug a radio into the outlet, and 
have similar problems, you need an electrician.
If you are using a power strip, make sure it is working 
properly, and that it is turned on.


Power switch

If your power switch is mechanical, make sure that you 
hear or feel a click when it is engaged.  If not, you may need 
a new power switch.  Place a call at Cincinnati Printer Repair
If your switch is electrical (if, when you push it, 
nothing physically moves) check to see if it is pressed in 
or looks out of place.  If so, it could be that the board that 
this switch connects to is broken or off track.  Place a call at 
Cincinnati Printer Repair


Print Cartridge

Make sure your print cartridge is seated properly.
Try replacing your print cartridge.


Doors and panels

Check all of the doors, panels, and lids to make sure they 
are closed properly.


Still no power?

Place a call at Cincinnati Printer Repair